Close the File and Try Again

What is "The action cannot exist completed because the file is open in another program" error

The action cannot be completed considering the file is open in some other program is a bulletin reflected in the "File in Apply" window when trying to delete, rename, or move specific files and folders. The error appears considering the manipulated file or folder is currently used past some application or groundwork procedure. In most cases, it is enough to observe and terminate the process that uses the file or simply restart your PC. However, there are situations when none of the above helps you get rid of the problem. The issue may keep reiterating itself even after rebooting the system. Unfortunately, the featured message offers no real solution on how to avoid this problem. Intuitively, users should end the related process and try to delete or move their files afterward. Sometimes there are simply no related processes visible, which means users are unable to shave them. Luckily, in that location are potential prospects to address this issue and restore full control of the file. Follow this bundle of methods beneath that will assist you lot remove the issue potentially.

The activity cannot exist completed because the file is open in some other programme fault

The action cannot be completed because the file is open in some other program error

Download Windows Repair Tool

Download Windows Repair Tool

At that place are special repair utilities for Windows, that can solve bug related to registry abuse, file organisation malfunction, Windows drivers instability. We recommend you to employ Avant-garde System Repair to fix the "The activeness cannot be completed because the file is open in another program" fault in Windows 10.

1. Restart Windows File Explorer

File Explorer is an in-built background process responsible for searching, inspecting, and changing files stored on your PC. We suspect there could be a trouble in how it operates, which results in a disability to run manipulations with files. Therefore, permit's try to restart information technology via Job Manager. The steps are brusque and practice not require a lot of time to implement them. Here is how:

1. Right-click on Starting time button and cull Task Manager.
2. In the Processes tab, whorl down the listing until y'all observe Windows Explorer.
3. Correct-click on information technology and select Restart.
4. And so wait a couple of seconds and attempt to alter the problematic file again.

Even if you solve the result using these steps, it is even so likely that a like error volition announced again in the future. This is why y'all should treat this just as a temporary solution.

2.Empty Recycle bin

It is hard to believe, only immigration your recycle bin may actually resolve the trouble. Some users reported it was the case. Simply discover your Recycle Bin on desktop, correct-click on it and choose Empty Recycle Bin. Confirm the action if promoted and see the error message resolved. Despite its effectiveness, information technology is only a temporary solution that should be performed each time you stumble into the aforementioned problem again. Test other solutions below to rectify the problem once and for all.

three. Find and terminate the Associated process

Every bit we already know, "The action cannot be completed because the file is open up in another program" message indicates there is some file-related procedure yet running, which denies attempts to delete or effect changes with files. Instead of using traditional Task Manager, we are going to access Resource Monitor which is more advanced and provides better tools to observe and lift the stuck process. Follow these steps below to exercise information technology:

1. Press Windows Key + R buttons, type resmon.exe into the field, and click OK or Enter to open it upwards.
2. After Resource Monitor is opened, go to CPU tab and expand Associated Handles at the bottom.
3. Search for the name of a problematic files or folder and expect until Resource Monitor finds all processes related to it.
4. Then, right-click on the constitute processes and select End Process to shut it.
5. After doing these steps, deleting or changing a file should no longer exist met by the error.

4. Clean up thumbnails

Thumbnails are cached copies of files stored by Windows to provide faster admission to files. In other words, Windows does not have to expect for icons of images, videos, or documents to load as they have already been memorized by your organization. Every bit research shows, these thumbnails may crusade some problems with the file system and lead to editing issues. Thumbnails are created automatically by default, but y'all can disable this feature using instructions farther in our guide. For at present, let'due south delete thumbnails. There are ii ways to do it:

using Disk Cleanup

1. Open This PC.
2. Right-click on your chief deejay and choose Backdrop.
3. Observe and click on Disk Cleanup.
4. Amidst the list of checkboxes, select Thumbnails and click OK to remove them.
5. After this, you should be able to see the problem resolved.

using Command Prompt

1. Search for Command Prompt in the searching box next to the Start Card button. Right-click on it and choose Run as administartor
2. Make sure you have your main system bulldoze selected. If not, enter its alphabetic character ("C:") manually and push Enter.
3. And so, re-create-paste del /ash /s thumbs.db and press Enter over again.
4. Await until the process deletes thumbnail databases, close the window, and check if the problem with files persists.

v. Disable Thumbnails

If deleting thumbnails helped and you want to stop their generation completely, and so there is an option to practice information technology. You should try information technology even if none of the previous methods helped, just to test all the existing solutions. There is a plethora of ways to switch off the creation of thumbnails. Here are the almost popular:

using File Explorer Settings

1. Open up This PC and click View on the very height of the window.
2. From the drop-down card find and choose Options.
3. In the opened window, become to View, scroll down a bit and select E'er show icons, never thumbnails under Files and Folders.
4. Click Apply and OK to save the changes.

using Performance Options

1. Open up This PC and correct-click on empty space nether your disks.
2. Choose Properties and navigate to Advanced system settings.
3. Under Performance, click Settings.
4. From the appeared list of options, find and uncheck option named Bear witness thumbnails instead of icons.
5. Click Utilise and OK to save the changes.

using Registry Editor

1. Printing Windows Key + R buttons and type regedit into the field.
2. Open up it upwards and confirm UAC window.
3. Then, open up this path HKEY_CURRENT_USER/Software/Microsoft/Windows/CurrentVersion/Explorer/Advanced on the left pane.
4. After reaching Advanced binder, you will run into the list of entries on the right pane.
5. We demand to find IconsOnly and double-click on it.
6. Change its value to ane and click OK to disable thumbnails. If y'all want to enable them dorsum, just blazon 0 instead of i.

using Group Policy Editor

1. Printing Windows Key + R buttons like in a higher place, type gpedit.msc into the field and click OK or Enter to open up it up.
2. On the left pane, navigate to User Configuration > Authoritative Templates > Windows Components > File Explorer.
3. After clicking on File Explorer, you will exist able to run into the listing of unlike entries.
4. Notice and double-click on Turn off caching of thumbnails in hidden thumbs.db files.
5. Ready its value to Enabled. Click Apply and OK to save changes.

All iv methods pursue the same goal – to disable the generation of thumbnails and prevent them from causing modification problems. Choose either of them and follow each stride advisedly. Especially you should be attentive when changing values in Registry and Group Policy Editors. Irresolute other settings other than what we listed may atomic number 82 to problems with other segments, so make sure yous follow each step strictly equally written.

half-dozen. Disable Preview Panel

Based on data we gathered from forums, some users managed to resolve "The action cannot exist completed because the file is open in some other plan" message past turning Preview mode off. This is a useful, yet sometimes conflicting option offered by Windows to view the content of certain files prior to accessing them. It is easy to do and will not affect system performance in any mode. On the opposite, disabling this feature may help boost arrangement performance a scrap on slack PCs because Windows will not have to process and preview the inside content.

1. As we already did, open This PC and click View on the very top of the window.
2. Click onto Preview pane to disable or enable it. The enabled option will be highithed with blueish in the background, then make certain it is disabled.
3. After this cheque whether you have the same issue with modifying a file.

seven. Change File Explorer to launch windows in divide processes

As a rule, File Explorer launches and maintains all opened windows in a unmarried procedure. Therefore, it may be difficult to keep the stable functioning of opened windows when resources are non distributed. We recommend you try to alter File Explorer to open up windows in a separate process. This should alleviate the pressure and win some room for amend stability. Here is how you tin do this:

1. Open up This PC and click View on the very elevation of the window.
2. From the drop-down menu find and cull Options.
3. In the opened window, become to View, and cheque the Launch folder windows in a separate procedure selection.
4. Then click Use and OK to finish.

viii. Optimize your drive

Another quick method to solve the upshot is to optimize your bulldoze performance. You can practice this past clicking on a single button inside of drive backdrop. This is how:

1. Open This PC and right-click on the drive where the problematic file or folder is located.
2. Cull Backdrop and navigate to the Tools tab.
3. At the lesser, click Optimize and follow the on-screen instructions to finish the process.

9. Optimize Folders

If you struggle to delete or change a folder with a specific type of files similar music, images, documents, videos, or others, and so the solution could be to optimize a problematic folder by choosing the right category of files. You can do information technology the following style:

1. Open up a binder with problematic files and right-click on empty space.
2. Choose Poroperties and get to Customize tab.
3. Nether Optimize this folder for:, choose the blazon of files stored in a folder.
4. You should too select the Also use this template to all subfolders choice.
5. After doing and so, click Apply and OK to salve the changes.

10. Delete or edit problematic files in Clean Bootup

Clean bootup is a Windows feature helping users kicking their PC only with in-built apps and services. This helps you find out whether some secondary app or process causes the problem. By accessing this mode, you should be able to change your files without problem. To launch your organization in Clean bootup way, follow these steps below:

1. Printing Windows key + R combination and paste msconfig.
2. Then in the opened window go to the Services tab located on top.
3. Check the box next to Hibernate All Microsoft Services and click on the Disable all button.
4. At present cull the General tab and select the Selective startup option. Make certain that the box is checked just next to the Load System Services.
5. Click Apply and OK. Then reboot your PC.

Now you can try to edit your files whilst being in Make clean Kicking style. No thing whether you managed or failed to resolve the issue, information technology is of import to plow Windows back to Normal Startup settings. To do this, only redo all the steps you implemented above by enabling the disabled services and irresolute your startup option from Selective to Normal.

eleven. Install fresh .Internet Framework updates

.NET Framework plays a significant role in building and sustaining applications. In some cases, people may lack information technology or have a malfunction of some sort. Thereby, it is worth reinstalling the entire Framework package by downloading the upward-to-appointment client from the official Microsoft website. Download the latest version from the list.

Summary

Although being unable to delete or move your files may not seem to be a major problem, it is plenty to crusade disturbance and inconvenience whilst using your PC. We hope yous are no longer forced to encounter "The action cannot exist completed because the file is open up in another programme" message. Fifty-fifty if you do in the future, y'all are now more aware of what steps to apply in order to solve it. You can find a number of other PC-troubleshooting articles on our website if there is something else downgrading your usage.

lihouturuily43.blogspot.com

Source: https://www.bugsfighter.com/how-to-fix-the-action-cannot-be-completed-because-the-file-is-open-in-another-program-error-in-windows-10/

Share this post